PVC candle tutorial~Fashion Easter

Tuesday, April 13, 2010 Posted by admin at 3:29 PM

Here is a tutorial on how to make your own pvc candles.
Your going to need some: pvc pipe any diameter, cardboard or foam core, spray paint & acrylic paint, twine or embroidery floss and a lot of gluesticks.

Firstly, I cut the pvc pipe using a hack saw into various lengths keeping in mind that if you were to light them all at the same time they would be about the same height when blown out.... so cut them about 1/4 to 1 inch in different various heights. 2.) I then cut circles to fit each circumference of just one end of the pvc pipe. I poked a hole in the center of the circles and fed a double thickness of embroidery floss through to use as the faux wick.

3.) Next I used my hot glue gun to drip/dribble glue around the pvc pipe to give it the appearance of hot wax that had dripped down the sides of the candle. You can do a lot...or just a little bit whatever is to your liking. I went around the entire candle several times so it had a nice build up of melted/dripped wax.

4.) After melting hot glue down the sides of all the faux candles, I spray painted them with a brown paint called Nutmeg.

5.)When the candles had all dried, I quickly painted black acrylic paint over each candle rubbing off most of it to give it an aged look. You can see below the difference the black paint gives each candle. I wanted them to look old and dirty.... these are going to be used as props at our yearly pirate party.